What’s MARSHINE Manual Winch Tiling Cable Drum Trailer?
The MARSHINE Manual Winch Operated Tilting Cable Drum Trailer (MAR-MWT11) is designed for light- to medium-duty cable installation projects. Featuring a manual winch-operated tilting loading system, it eliminates the need for hydraulic components while maintaining excellent reliability and ease of operation. With an 11 KN load capacity, compatibility with cable drums ranging from 950 mm to 1850 mm in diameter, a maximum drum width of 1000 mm, and a 70 mm heavy-duty drum shaft equipped with a mechanical disc brake, the trailer provides a safe and efficient solution for transporting and dispensing cable. The mechanical loading system reduces maintenance requirements while offering a high payload-to-weight ratio for everyday utility work.
So How To Use MARSHINE Tiling Drum Trailer Properly?
Perform Inspection
Before loading a cable drum, inspect both the trailer and its operating components. You need to check the trailer for its frame, winch, winch cable, tiling loading mechanism, drum shaft, disc brake, tyres, hitch and wheel nuts. Also please verify that the selected cable drum falls within the trailer's operating specifications:
Load Capacity: 11 KN;
Drum Diameter: 950–1850 mm;
Maximum Drum Width: 1000 mm;
Shaft Diameter: 70 mm;
Routine inspection helps prevent equipment damage and improves job-site safety.
Position the Trailer
Move the MARSHINE Manual Winch Operated Tilting Cable Drum Trailer onto firm, level ground before loading. Secure the trailer by:
Connecting it to the towing vehicle or using suitable wheel chocks.
Ensuring there is sufficient space behind the trailer for the cable drum.
Confirming the loading path is free from obstacles.
A stable working position makes the loading operation smoother and safer.
Prepare the Tilting Loading System
The MAR-MWT11 uses a manual hand winch-operated tilting mechanism rather than hydraulic cylinders. To prepare the trailer:
Release the transport locking mechanism.
Operate the manual winch slowly.
Allow the trailer cradle to tilt backward until it reaches the loading position.
The mechanical tilting design allows a single operator to position the trailer without external lifting equipment, while eliminating the maintenance associated with hydraulic systems.
Position the Cable Drum
Roll or carefully move the cable drum into alignment with the tilted trailer. Please ensure that:
The drum is centered.
The shaft holes are aligned.
The drum diameter is within the specified range.
The drum width does not exceed 1000 mm.
Install the Drum Shaft
Insert the 70 mm heavy-duty drum shaft through the center of the cable drum. Once installed:
Position both shaft ends in the trailer supports.
Confirm the shaft rotates freely.
Ensure the drum is centered before lifting.
The full-bearing shaft system supports smooth drum rotation during cable payout, an important feature for overhead line stringing and underground cable installation.
Raise the Drum
Operate the manual winch steadily. As the winch pulls:
The tilting frame rotates upward.
The drum is lifted clear of the ground.
The trailer returns to its transport position.
This is to avoid rapid winching or sudden movements. You need to continue until the MARSHINE Manual Winch Operated Tilting Cable Drum Trailer locks securely into its operating position.
Secure the Drum
Before transportation or cable dispensing:
Verify that the drum shaft is fully seated.
Engage all locking devices.
Confirm the drum cannot move sideways.
Test the trailer stability.
Properly securing the drum prevents unwanted movement during transport and cable installation.
Transport the Trailer
Drive carefully, particularly when carrying a fully loaded drum, and follow local road regulations for towing. Comparable mechanical drum trailers are designed with road-going trailer systems that include brakes and lighting for safe transport between worksites.
Dispense the Cable
Once the trailer reaches the installation site:
Park on stable ground.
Secure the trailer.
Release the drum brake gradually.
Connect the cable to the pulling equipment.
Begin pulling at a controlled speed.
The integrated mechanical disc brake allows operators to regulate drum rotation, preventing excessive cable payout and helping maintain smooth, controlled cable installation. Steady braking improves cable handling while reducing the risk of loose cable loops.
Complete the Operation
After cable installation:
Fully apply the drum brake.
Remove the drum shaft if unloading is required.
Lower the tilting frame using the manual winch.
Carefully unload the empty drum.
Inspect the trailer before storage.
